The Four Most Reliable Ways to Deice Windshields
December 28, 2020 9:44 pm Leave your thoughtsThe cold weather of winter has arrived, and it’s time to batten down the hatches as we settle in for another frosty season. Driving on ice-covered roads is hard enough, but doing so while trying to see through a frost-coated windshield makes the tasks even harder and often more dangerous. Keep yourself, your passengers, other drivers and pedestrians out of harm’s way by knowing the best way to safely deice a windshield in Salt Lake City, UT.
How to safely remove ice from your windshield
Winters here in the Beehive State get very chilly. It’s not uncommon for people living here to want to know how to quickly remove ice from a windshield in Salt Lake City, UT. An ice-covered windshield means you have to spend at least an additional 10 minutes getting through all of that ice before you can safely start driving. Fortunately, the following deicing methods should speed up the process without potentially scratching or cracking your windshield:
- Use a windshield cover: These are available at any automotive store. Placing a cover on your windshield at night significantly reduces the amount of frosty buildup that accumulates between dusk and dawn.
- Pretreat your windshield: Another product you may find helpful is spray-on ice and frost shield solutions. Apply this chemical solution to your windshield when you arrive home after work to minimize the amount of ice that accumulates before your morning commute. You can also mix your own with two parts water to one part vinegar (example: one cup of water combined with half a cup of white vinegar). Spray your homemade mixture onto your windshield in the evening and wipe it off with a rag or paper towel.
- Spray it down: If you didn’t pretreat your windshield or cover it the night before, mix a solution of two parts 70 percent isopropyl alcohol and one part water in a spray bottle, then douse your icy windshield with it. This solution should begin melting the ice immediately, making it easier to scrape it off gently. Store any remaining fluid at room temperature until the next time you need it. For those who don’t have rubbing alcohol, fill a spray bottle with water, add two heaping tablespoons of salt and shake it up until the salt dissolves. Apply this solution to your windshield the same way you would the alcohol mixture. Avoid spraying this solution on any metal components of your vehicle, as the salt will damage them.
- Patience: During the winter, get into the habit of starting your vehicle at least five minutes before you have to leave. Once you’ve started your car, truck or SUV, set the heater to defrost, adjust the airflow to recirculate and set the temperature control to the highest heat level. Then let your vehicle do its thing as you use this time to get everything together you need to take with you and make sure you’re ready to hit the road.
Once you’ve figured out the best way to safely deice a windshield in Salt Lake City, UT, be sure to drive safely this winter! If you find yourself in need of towing or automotive repair, be sure to contact AMR Auto Repair & Towing for fast, reliable and affordable services.
Categorised in: Driving Tips
This post was written by Writer